img not found!

8in or 16in 24in 1 DVB-T Modulator HY-21-DVBTxx

8in or 16in 24in 1 DVB-T Modulator HY-21-DVBTxx

Price range: $1,028.00 through $1,450.00

Compare
SKU: HY-21-DVBTxx Category:

Description

Product Overview

HY-21-DVTBXX 8in1/16in1/24in1 DVB-T modulator is an all-in-one device developed by DEXIN. It supports maximum 256 (or 512, or 768) IP input through the GE/SFP port and has 8 (or 16, or 24) multiplexing channels and 8 (or 16, or 24) DVB-T modulating channels of non-adjacent carriers (50MHz~960MHz). The device is characterized with high integrated level, high performance and low cost. This is very adaptable to newly generation DTV broadcasting system.

 

Key Features

  • 3 GE ports for IP input and output –Version I & II
    • 6 GE ports (4*RJ45, 2*SFP), data1-4 for IP input (RJ45/SFP), data 3-4 for IP output –Version III
  • Max 840Mbps for each input
  • Supports accurate PCR adjusting
  • Supports PID remapping and PSI/SI editing
  • Supports up to 180 PIDs remapping per channel
  • Support 8 (or 16, or 24) multiplexed TS over UDP/RTP/RTSP output
  • 8 (or 16, or 24) DVB-T non-adjacent carriers output, compliant to ETSI EN300 744 standard
  • Supports RS (204,188) encoding
  • Support Web-based Network managementProduct Overview

 

Inner Principle Chart

        Version I & II – For 8&16 carriers out):

 

Version III – For 24 carriers out):: 

 

Carrier Setting Illustration

 

 

 

 

 

Specifications

Input Input Max 256/512 IP input through 3 (front-panel Data port, Data 1 and Data 2) 100/1000M Ethernet Port (SFP interface optional). – For Version I & II

Max 768 IP input through data ports 1 to 4 100/1000M Ethernet Ports (RJ45 and SFP interface alternative). –For Version III

Transport Protocol TS over UDP/RTP, unicast and multicast, IGMP V2/V3
Transmission Rate Max 840Mbps for each input channel
Mux Input Channel 256 IP streams – Version I

512 IP streams – Version II

768 IP streams – Version III

Output Channel 8 (or 16, or 24)
Max PIDs 180 per channel
Functions PID remapping(auto/manually optional)
PCR accurate adjusting
PSI/SI table automatically generating
Modulation

Parameters

Output Channel 8 non-adjacent carriers output – Version I

16 non-adjacent carriers output – Version II

24 non-adjacent carriers output – Version III

Modulation Standard ETSI EN300 744
Constellation QPSK/16QAM/64QAM
Bandwidth 6/7/8 MHz
Trans mode 2K/4K/8K
FEC 1/2, 2/3, 3/4, 5/6, 7/8
RF Output Interface F typed output port for 8 (or 16) non-adjacent carriers
RF Range 50~960MHz, 1kHz stepping
Output Level -20~+10dbm (for all carriers), 0.5db stepping
MER ≥ 40dB
ACL -55 dBc
TS output 8 (or 16, or 24) IP output over UDP/RTP/RTSP, unicast/multicast, 2 100/1000M Ethernet Ports
System Web-based Network management
General Demission 420mm×440mm×44.5mm (WxLxH)
Temperature 0~45℃(operation), -20~80℃(storage)
Power Supply AC 100V±10%, 50/60Hz or AC 220V±10%, 50/60Hz

 

Order Information:

Type  Description Version I Version II Version III
HY-21-DVBT8 256 IP input to 8ch DVB-T carriers out, 8 IP out x
HY-21-DVBT16 512 IP input to 16ch DVB-T carriers out, 16 IP out x
HY-21-DVBT24 768 IP input to 24ch DVB-T carriers out, 24 IP out x

Additional information

Type

"DVBT08", "DVBT16", "DVBT24"

Reviews

There are no reviews yet.

Be the first to review “8in or 16in 24in 1 DVB-T Modulator HY-21-DVBTxx”

Your email address will not be published. Required fields are marked *

Our Office Time

contact

Do you have any question?